4663 Candy2o – Red Oxide
£12.61 – £19.73
Available on back-order
4600 Series Candy2o – TRUE CANDY PERFORMANCE
Colour swatch (spear head) candy2o applied over 6013 AutoBorne Silver Sealer
Water-Based, 100% Transparent Dye Colours.
Made with Metal Complex Dyes that are Light-Fast Stable for an Optimized Colour Life.
Concentrated. Mix candy2o with 4050 UVLS Gloss Clear or 4030 Intercoat.
- Airbrush: any airbrush tip-size, mix approximately 9:1 mix ratio 4030 Intercoat or 1:1 4050, thin 5% – 10% with 4011 Reducer or as desired
- Spray-Gun: 1.2 – 1.3mm tip-size, mix approximately 9:1 mix ratio 4030 Intercoat 6:1 4050, thinning not required
Anodized Candy Colours
Colour swatch (car shape) candy2o applied over W357 Wicked Quicksilver
- Apply candy2o over W357 Quicksilver
- For Anodized Candy Apple Colours, apply over W358 Gold Chrome.
Description
4600 Series Candy2o – TRUE CANDY PERFORMANCE
Colour swatch (spear head) candy2o applied over 6013 AutoBorne Silver Sealer
Water-Based, 100% Transparent Dye Colours.
Made with Metal Complex Dyes that are Light-Fast Stable for an Optimized Colour Life.
Concentrated. Mix candy2o with 4050 UVLS Gloss Clear or 4030 Intercoat.
- Airbrush: any airbrush tip-size, mix approximately 9:1 mix ratio 4030 Intercoat or 1:1 4050, thin 5% – 10% with 4011 Reducer or as desired
- Spray-Gun: 1.2 – 1.3mm tip-size, mix approximately 9:1 mix ratio 4030 Intercoat 6:1 4050, thinning not required
Anodized Candy Colours
Colour swatch (car shape) candy2o applied over W357 Wicked Quicksilver
- Apply candy2o over W357 Quicksilver
- For Anodized Candy Apple Colours, apply over W358 Gold Chrome.
Brilliant transparent colours for custom refinishing and airbrushing. Candy 2O combine advanced water-soluble, urethane resin technology with crystal-clear dyes to create truly exceptional candy colours.
Candy2o are concentrate. Mix with 4030 Intercoat or 4050 UVLS Gloss Clear. Optional lowering of viscosity is achieved by reducing with 4011 Reducer.
4 to 6 medium wet coats are recommended for full colour saturation. Allow each coat to air dry tack free, approximately 10 minutes flash time in between coats when painting in non-humid, temperate conditions.
Candy2o colours are made for the graphic arts and have excellent adhesion so they will not lift or peel when taped on. Apply 4030 Intercoat direct over air-dried Candy2o to prevent bleeding when applying other colours and marking when taping.
Candy2o work with a wide variety of spray-guns and airbrushes. The following specs are recommended as a starting point. Achieving a finely atomized spray pattern is the goal. Reduce the Candy2o and adjust the air pressure to achieve a spray pattern that is smooth and free of large colour droplets or a ‘rough’ over-spray look.
+ spray-gun: 1.2 – 1.3mm tip, 25 – 35 psi
+ mini-gun: 0.8 – 1.0mm, 25 – 35 psi
+airbrush: 0.5mm – mixing with 4030 or 4050 is generally enough, for smaller tip-sizes reduce with 4011Reducer as needed to achieve optimum atomization
